gzip: stdout: Broken pipe

gzip: stdout: Broken pipe
curl(1)				  Curl Manual			       curl(1)



NAME
       curl - transfer a URL

SYNOPSIS
       curl [options] [URL...]

DESCRIPTION
       curl  is	 a tool to transfer data from or to a server, using one of the
       supported protocols (HTTP, HTTPS, FTP, FTPS,  SCP,  SFTP,  TFTP,	 DICT,
       TELNET,	LDAP  or  FILE).  The command is designed to work without user
       interaction.

       curl offers a busload of useful tricks like proxy support, user authen-
       tication,  FTP upload, HTTP post, SSL connections, cookies, file trans-
       fer resume and more. As you will see below, the number of features will
       make your head spin!

       curl  is	 powered  by  libcurl  for  all transfer-related features. See
       libcurl(3) for details.

URL
       The URL syntax is protocol-dependent. You'll find a  detailed  descrip-
       tion in RFC 3986.

       You  can	 specify  multiple  URLs or parts of URLs by writing part sets
       within braces as in:

	http://site.{one,two,three}.com

       or you can get sequences of alphanumeric series by using [] as in:

	ftp://ftp.numericals.com/file[1-100].txt
	ftp://ftp.numericals.com/file[001-100].txt    (with leading zeros)
	ftp://ftp.letters.com/file[a-z].txt

       No nesting of the sequences is supported at the moment, but you can use
       several ones next to each other:

	http://any.org/archive[1996-1999]/vol[1-4]/part{a,b,c}.html

       You  can	 specify  any amount of URLs on the command line. They will be
       fetched in a sequential manner in the specified order.

       Since curl 7.15.1 you can also specify a step counter for  the  ranges,
       so that you can get every Nth number or letter:

	http://www.numericals.com/file[1-100:10].txt
	http://www.letters.com/file[a-z:2].txt

       If  you	specify	 URL  without protocol:// prefix, curl will attempt to
       guess what protocol you might want. It will then default	 to  HTTP  but
       try  other  protocols based on often-used host name prefixes. For exam-
       ple, for host names starting with "ftp." curl will assume you  want  to
       speak FTP.

       curl  will  do  its best to use what you pass to it as a URL. It is not
       trying to validate it as a syntactically correct URL by any  means  but
       is instead very liberal with what it accepts.

       Curl will attempt to re-use connections for multiple file transfers, so
       that getting many files from the same server will not do multiple  con-
       nects / handshakes. This improves speed. Of course this is only done on
       files specified on a single command line and  cannot  be	 used  between
       separate curl invokes.

PROGRESS METER
       curl  normally  displays a progress meter during operations, indicating
       the amount of transferred data,	transfer  speeds  and  estimated  time
       left, etc.

       However,	 since	curl displays this data to the terminal by default, if
       you invoke curl to do an operation and it is about to write data to the
       terminal,  it disables the progress meter as otherwise it would mess up
       the output mixing progress meter and response data.

       If you want a progress meter for HTTP POST or PUT requests, you need to
       redirect	 the  response	output to a file, using shell redirect (>), -o
       [file] or similar.

       It is not the same case for FTP upload as that operation does not  spit
       out any response data to the terminal.

       If you prefer a progress "bar" instead of the regular meter, -# is your
       friend.

OPTIONS
       In general, all boolean options are enabled with --option and yet again
       disabled	 with --no-option. That is, you use the exact same option name
       but prefix it with "no-". However, in this list we mostly only list and
       show  the --option version of them. (This concept with --no options was
       added in	 7.19.0.  Previously  most  options  were  toggled  on/off  on
       repeated use of the same command line option.)

       -a/--append
	      (FTP/SFTP) When used in an upload, this will tell curl to append
	      to the target file  instead  of  overwriting  it.	 If  the  file
	      doesn't  exist,  it  will	 be  created.	Note that this flag is
	      ignored by some SSH servers (including OpenSSH).

       -A/--user-agent 
	      (HTTP) Specify the User-Agent string to send to the HTTP server.
	      Some   badly   done  CGIs	 fail  if  this	 field	isn't  set  to
	      "Mozilla/4.0". To encode blanks  in  the	string,	 surround  the
	      string  with  single  quote marks. This can also be set with the
	      -H/--header option of course.

	      If this option is set more than once, the last one will  be  the
	      one that's used.

       --anyauth
	      (HTTP) Tells curl to figure out authentication method by itself,
	      and use the most secure one the remote site claims  to  support.
	      This is done by first doing a request and checking the response-
	      headers, thus possibly inducing  an  extra  network  round-trip.
	      This  is	used  instead  of  setting  a  specific authentication
	      method, which you can do with  --basic,  --digest,  --ntlm,  and
	      --negotiate.

	      Note  that  using --anyauth is not recommended if you do uploads
	      from stdin, since it may require data to be sent twice and  then
	      the client must be able to rewind. If the need should arise when
	      uploading from stdin, the upload operation will fail.

       -b/--cookie 
	      (HTTP) Pass the data to the HTTP server as a cookie. It is  sup-
	      posedly  the data previously received from the server in a "Set-
	      Cookie:" line.  The data should be in the format	"NAME1=VALUE1;
	      NAME2=VALUE2".

	      If  no  '=' symbol is used in the line, it is treated as a file-
	      name to use to read previously stored cookie lines  from,	 which
	      should  be used in this session if they match. Using this method
	      also activates the "cookie parser" which will make  curl	record
	      incoming cookies too, which may be handy if you're using this in
	      combination with the -L/--location option. The  file  format  of
	      the  file	 to  read cookies from should be plain HTTP headers or
	      the Netscape/Mozilla cookie file format.

	      NOTE that the file specified with -b/--cookie is	only  used  as
	      input.  No cookies will be stored in the file. To store cookies,
	      use the -c/--cookie-jar option or you could even save  the  HTTP
	      headers to a file using -D/--dump-header!

	      If  this	option is set more than once, the last one will be the
	      one that's used.

       -B/--use-ascii
	      Enable ASCII transfer when using FTP or LDAP. For FTP, this  can
	      also  be enforced by using an URL that ends with ";type=A". This
	      option causes data sent to stdout to be in text mode  for	 win32
	      systems.

       --basic
	      (HTTP)  Tells curl to use HTTP Basic authentication. This is the
	      default and this option is usually pointless, unless you use  it
	      to  override  a  previously  set	option	that  sets a different
	      authentication method (such as --ntlm,  --digest,	 or  --negoti-
	      ate).

       --ciphers 
	      (SSL) Specifies which ciphers to use in the connection. The list
	      of ciphers must specify valid ciphers. Read  up  on  SSL	cipher
	      list	     details	       on	    this	  URL:
	      http://www.openssl.org/docs/apps/ciphers.html

	      NSS ciphers are done differently than OpenSSL  and  GnuTLS.  The
	      full  list of NSS ciphers is in the NSSCipherSuite entry at this
	      URL: http://directory.fedora.redhat.com/docs/mod_nss.html#Direc-
	      tives

	      If this option is used several times, the last one will override
	      the others.

       --compressed
	      (HTTP) Request a compressed response using one of the algorithms
	      libcurl supports, and return the uncompressed document.  If this
	      option is used and the server  sends  an	unsupported  encoding,
	      curl will report an error.

       --connect-timeout 
	      Maximum  time  in	 seconds  that you allow the connection to the
	      server to take.  This only limits	 the  connection  phase,  once
	      curl  has	 connected this option is of no more use. See also the
	      -m/--max-time option.

	      If this option is used several times, the last one will be used.

       -c/--cookie-jar 
	      Specify to which file you want curl to write all cookies after a
	      completed operation. Curl writes	all  cookies  previously  read
	      from  a  specified  file	as  well  as all cookies received from
	      remote server(s). If no cookies are known, no file will be writ-
	      ten.  The	 file  will  be written using the Netscape cookie file
	      format. If you set the file name to  a  single  dash,  "-",  the
	      cookies will be written to stdout.

	      NOTE If the cookie jar can't be created or written to, the whole
	      curl operation won't fail or even report an error clearly. Using
	      -v  will	get  a warning displayed, but that is the only visible
	      feedback you get about this possibly lethal situation.

	      If this option is used several times, the	 last  specified  file
	      name will be used.

       -C/--continue-at 
	      Continue/Resume  a  previous  file transfer at the given offset.
	      The given offset is the exact  number  of	 bytes	that  will  be
	      skipped,	counting  from the beginning of the source file before
	      it is transferred to the destination.  If used with uploads, the
	      FTP server command SIZE will not be used by curl.

	      Use  "-C	-" to tell curl to automatically find out where/how to
	      resume the transfer. It then uses the given  output/input	 files
	      to figure that out.

	      If this option is used several times, the last one will be used.

       --create-dirs
	      When used in conjunction with the -o option,  curl  will	create
	      the  necessary  local directory hierarchy as needed. This option
	      creates the dirs mentioned with the -o option, nothing else.  If
	      the  -o file name uses no dir or if the dirs it mentions already
	      exist, no dir will be created.

	      To create remote directories when using FTP or SFTP, try	--ftp-
	      create-dirs.

       --crlf (FTP) Convert LF to CRLF in upload. Useful for MVS (OS/390).

       --crlfile 
	      (HTTPS/FTPS)  Provide a file using PEM format with a Certificate
	      Revocation List that may specify peer certificates that  are  to
	      be considered revoked.

	      If this option is used several times, the last one will be used.

	      (Added in 7.19.7)

       -d/--data 
	      (HTTP) Sends the specified data in a POST request	 to  the  HTTP
	      server,  in  the	same  way  that a browser does when a user has
	      filled in an HTML form and presses the submit button. This  will
	      cause curl to pass the data to the server using the content-type
	      application/x-www-form-urlencoded.  Compare to -F/--form.

	      -d/--data is the same  as	 --data-ascii.	To  post  data	purely
	      binary, you should instead use the --data-binary option. To URL-
	      encode the value of a form field you may use --data-urlencode.

	      If any of these options is used more than once on the same  com-
	      mand  line,  the	data  pieces specified will be merged together
	      with a separating	 &-symbol.  Thus,  using  '-d  name=daniel  -d
	      skill=lousy'  would  generate  a	post  chunk  that  looks  like
	      'name=daniel&skill=lousy'.

	      If you start the data with the letter @, the rest	 should	 be  a
	      file  name  to read the data from, or - if you want curl to read
	      the data from stdin.  The contents of the file must  already  be
	      URL-encoded.  Multiple files can also be specified. Posting data
	      from a file named	 'foobar'  would  thus	be  done  with	--data
	      @foobar.

       --data-binary 
	      (HTTP)  This  posts data exactly as specified with no extra pro-
	      cessing whatsoever.

	      If you start the data with the letter @, the rest	 should	 be  a
	      filename.	  Data	is  posted in a similar manner as --data-ascii
	      does, except that newlines are  preserved	 and  conversions  are
	      never done.

	      If  this	option	is  used several times, the ones following the
	      first will append data as described in -d/--data.

       --data-urlencode 
	      (HTTP) This posts data, similar to the other --data options with
	      the exception that this performs URL-encoding. (Added in 7.18.0)

	      To be CGI-compliant, the  part should begin	 with  a  name
	      followed	by a separator and a content specification. The 
	      part can be passed to curl using one of the following syntaxes:

	      content
		     This will make curl URL-encode the content and pass  that
		     on.  Just	be careful so that the content doesn't contain
		     any = or @ symbols, as that will  then  make  the	syntax
		     match one of the other cases below!

	      =content
		     This  will make curl URL-encode the content and pass that
		     on. The preceding = symbol is not included in the data.

	      name=content
		     This will make curl URL-encode the content part and  pass
		     that  on.	Note that the name part is expected to be URL-
		     encoded already.

	      @filename
		     This will	make  curl  load  data	from  the  given  file
		     (including	 any  newlines), URL-encode that data and pass
		     it on in the POST.

	      name@filename
		     This will	make  curl  load  data	from  the  given  file
		     (including	 any  newlines), URL-encode that data and pass
		     it on in the POST. The  name  part	 gets  an  equal  sign
		     appended, resulting in name=urlencoded-file-content. Note
		     that the name is expected to be URL-encoded already.

       --delegation LEVEL
	      Set LEVEL to tell the server what it is allowed to delegate when
	      it comes to user credentials. Used with GSS/kerberos.

	      none   Don't allow any delegation.

	      policy Delegates	if  and only if the OK-AS-DELEGATE flag is set
		     in the Kerberos service ticket,  which  is	 a  matter  of
		     realm policy.

	      always Unconditionally allow the server to delegate.

       --digest
	      (HTTP) Enables HTTP Digest authentication. This is a authentica-
	      tion that prevents the password from being sent over the wire in
	      clear  text.  Use	 this in combination with the normal -u/--user
	      option  to  set  user  name  and	password.  See	also   --ntlm,
	      --negotiate and --anyauth for related options.

	      If  this option is used several times, the following occurrences
	      make no difference.

       --disable-eprt
	      (FTP) Tell curl to disable the use of the EPRT and LPRT commands
	      when doing active FTP transfers. Curl will normally always first
	      attempt to use EPRT, then LPRT before using PORT, but with  this
	      option,  it  will	 use PORT right away. EPRT and LPRT are exten-
	      sions to the original FTP protocol, and  may  not	 work  on  all
	      servers, but they enable more functionality in a better way than
	      the traditional PORT command.

	      Since curl 7.19.0, --eprt can be used to explicitly enable  EPRT
	      again and --no-eprt is an alias for --disable-eprt.

	      Disabling	 EPRT only changes the active behavior. If you want to
	      switch to passive mode you need  to  not	use  -P/--ftp-port  or
	      force it with --ftp-pasv.

       --disable-epsv
	      (FTP)  Tell  curl	 to  disable  the use of the EPSV command when
	      doing passive FTP transfers. Curl	 will  normally	 always	 first
	      attempt  to  use EPSV before PASV, but with this option, it will
	      not try using EPSV.

	      Since curl 7.19.0, --epsv can be used to explicitly enable  EPRT
	      again and --no-epsv is an alias for --disable-epsv.

	      Disabling EPSV only changes the passive behavior. If you want to
	      switch to active mode you need to use -P/--ftp-port.

       -D/--dump-header 
	      Write the protocol headers to the specified file.

	      This option is handy to use when you want to store  the  headers
	      that  a  HTTP  site sends to you. Cookies from the headers could
	      then  be	read  in  a  second  curl  invocation  by  using   the
	      -b/--cookie option! The -c/--cookie-jar option is however a bet-
	      ter way to store cookies.

	      When used in FTP, the FTP server response lines  are  considered
	      being "headers" and thus are saved there.

	      If this option is used several times, the last one will be used.

       -e/--referer 
	      (HTTP) Sends the "Referer Page" information to the HTTP  server.
	      This  can also be set with the -H/--header flag of course.  When
	      used with -L/--location you can append ";auto" to the  --referer
	      URL to make curl automatically set the previous URL when it fol-
	      lows a Location: header. The ";auto" string can be  used	alone,
	      even if you don't set an initial --referer.

	      If this option is used several times, the last one will be used.

       --engine 
	      Select the OpenSSL crypto engine to use for  cipher  operations.
	      Use  --engine  list  to  print  a	 list  of build-time supported
	      engines. Note that not all (or  none)  of	 the  engines  may  be
	      available at run-time.

       --environment
	      (RISC  OS ONLY) Sets a range of environment variables, using the
	      names the -w option supports,  to	 allow	easier	extraction  of
	      useful information after having run curl.

       --egd-file 
	      (SSL)  Specify  the  path	 name  to the Entropy Gathering Daemon
	      socket. The socket is used to seed the  random  engine  for  SSL
	      connections. See also the --random-file option.

       -E/--cert 
	      (SSL) Tells curl to use the specified certificate file when get-
	      ting a file with HTTPS or FTPS. The certificate must be  in  PEM
	      format.	If  the	 optional password isn't specified, it will be
	      queried for on the terminal. Note that  this  option  assumes  a
	      "certificate"  file that is the private key and the private cer-
	      tificate concatenated! See --cert	 and  --key  to	 specify  them
	      independently.

	      If  curl	is  built against the NSS SSL library then this option
	      can tell curl the nickname of the certificate to use within  the
	      NSS  database defined by the environment variable SSL_DIR (or by
	      default /etc/pki/nssdb). If the NSS  PEM	PKCS#11	 module	 (lib-
	      nsspem.so)  is  available	 then  PEM files may be loaded. If you
	      want to use a file from the current directory, please precede it
	      with "./" prefix, in order to avoid confusion with a nickname.

	      If this option is used several times, the last one will be used.

       --cert-type 
	      (SSL) Tells curl what certificate type the provided  certificate
	      is in. PEM, DER and ENG are recognized types.  If not specified,
	      PEM is assumed.

	      If this option is used several times, the last one will be used.

       --cacert 
	      (SSL) Tells curl to use the specified certificate file to verify
	      the peer. The file may contain  multiple	CA  certificates.  The
	      certificate(s)  must be in PEM format. Normally curl is built to
	      use a default file for this, so this option is typically used to
	      alter that default file.

	      curl  recognizes the environment variable named 'CURL_CA_BUNDLE'
	      if it is set, and uses the given path as a path  to  a  CA  cert
	      bundle. This option overrides that variable.

	      The  windows  version  of	 curl will automatically look for a CA
	      certs file named ?curl-ca-bundle.crt?, either in the same direc-
	      tory as curl.exe, or in the Current Working Directory, or in any
	      folder along your PATH.

	      If curl is built against	the  NSS  SSL  library,	 the  NSS  PEM
	      PKCS#11  module  (libnsspem.so)  needs  to be available for this
	      option to work properly.

	      If this option is used several times, the last one will be used.

       --capath 
	      (SSL)  Tells  curl to use the specified certificate directory to
	      verify the peer. The certificates must be in PEM format.

	      If this option is used several times, the last one will be used.

       -f/--fail
	      (HTTP)  Fail  silently (no output at all) on server errors. This
	      is mostly done to better enable scripts etc to better deal  with
	      failed  attempts.	 In  normal  cases when a HTTP server fails to
	      deliver a document, it  returns  an  HTML	 document  stating  so
	      (which  often  also describes why and more). This flag will pre-
	      vent curl from outputting that and return error 22.

	      This method is not fail-safe and there are occasions where  non-
	      successful  response  codes  will	 slip through, especially when
	      authentication is involved (response codes 401 and 407).

       --ftp-account [data]
	      (FTP) When an FTP server asks for "account data" after user name
	      and  password has been provided, this data is sent off using the
	      ACCT command. (Added in 7.13.0)

	      If this option is used twice, the second will override the  pre-
	      vious use.

       --ftp-create-dirs
	      (FTP/SFTP)  When	an  FTP or SFTP URL/operation uses a path that
	      doesn't currently exist on the server, the standard behavior  of
	      curl is to fail. Using this option, curl will instead attempt to
	      create missing directories.

       --ftp-method [method]
	      (FTP) Control what method curl should use to reach a file	 on  a
	      FTP(S)  server. The method argument should be one of the follow-
	      ing alternatives:

	      multicwd
		     curl does a single CWD operation for each	path  part  in
		     the  given URL. For deep hierarchies this means very many
		     commands. This is how RFC1738 says	 it  should  be	 done.
		     This is the default but the slowest behavior.

	      nocwd  curl  does	 no  CWD at all. curl will do SIZE, RETR, STOR
		     etc and give a full path to the server for all these com-
		     mands. This is the fastest behavior.

	      singlecwd
		     curl does one CWD with the full target directory and then
		     operates on the file "normally"  (like  in	 the  multicwd
		     case).  This  is  somewhat	 more standards compliant than
		     'nocwd' but without the full penalty of 'multicwd'.
       (Added in 7.15.1)

       --ftp-pasv
	      (FTP) Use passive mode for the data connection. Passive  is  the
	      internal	default behavior, but using this option can be used to
	      override a previous -P/-ftp-port option. (Added in 7.11.0)

	      If this option is used several times, the following  occurrences
	      make  no	difference.  Undoing  an enforced passive really isn't
	      doable but you must then instead enforce the  correct  -P/--ftp-
	      port again.

	      Passive mode means that curl will try the EPSV command first and
	      then PASV, unless --disable-epsv is used.

       --ftp-alternative-to-user 
	      (FTP) If authenticating with the USER and PASS  commands	fails,
	      send  this  command.   When  connecting  to  Tumbleweed's Secure
	      Transport server over FTPS using	a  client  certificate,	 using
	      "SITE  AUTH"  will tell the server to retrieve the username from
	      the certificate. (Added in 7.15.5)

       --ftp-skip-pasv-ip
	      (FTP) Tell curl to not use the IP address the server suggests in
	      its  response to curl's PASV command when curl connects the data
	      connection. Instead curl will re-use  the	 same  IP  address  it
	      already uses for the control connection. (Added in 7.14.2)

	      This  option has no effect if PORT, EPRT or EPSV is used instead
	      of PASV.

       --ftp-ssl
	      (FTP) Try to use SSL/TLS for the FTP connection.	Reverts	 to  a
	      non-secure  connection  if  the  server doesn't support SSL/TLS.
	      See also --ftp-ssl-control and --ftp-ssl-reqd for different lev-
	      els of encryption required. (Added in 7.11.0)

       --ftp-ssl-control
	      (FTP)  Require  SSL/TLS  for  the FTP login, clear for transfer.
	      Allows secure authentication, but non-encrypted  data  transfers
	      for  efficiency.	 Fails the transfer if the server doesn't sup-
	      port SSL/TLS.  (Added in 7.16.0)

       --ftp-ssl-reqd
	      (FTP) Require SSL/TLS for the FTP	 connection.   Terminates  the
	      connection  if  the  server  doesn't support SSL/TLS.  (Added in
	      7.15.5)

       --ftp-ssl-ccc
	      (FTP) Use CCC (Clear Command Channel)  Shuts  down  the  SSL/TLS
	      layer after authenticating. The rest of the control channel com-
	      munication will be unencrypted. This allows NAT routers to  fol-
	      low the FTP transaction. The default mode is passive. See --ftp-
	      ssl-ccc-mode for other modes.  (Added in 7.16.1)

       --ftp-ssl-ccc-mode [active/passive]
	      (FTP) Use CCC (Clear Command Channel) Sets  the  CCC  mode.  The
	      passive  mode  will  not initiate the shutdown, but instead wait
	      for the server to do it, and will not reply to the shutdown from
	      the server. The active mode initiates the shutdown and waits for
	      a reply from the server.	(Added in 7.16.2)

       -F/--form 
	      (HTTP) This lets curl emulate a filled-in form in which  a  user
	      has  pressed  the	 submit	 button. This causes curl to POST data
	      using the Content-Type multipart/form-data according to RFC2388.
	      This  enables  uploading of binary files etc. To force the 'con-
	      tent' part to be a file, prefix the file name with an @ sign. To
	      just get the content part from a file, prefix the file name with
	      the symbol <. The difference between @ and  <  is	 then  that  @
	      makes  a	file  get attached in the post as a file upload, while
	      the < makes a text field and just get the contents for that text
	      field from a file.

	      Example,	to send your password file to the server, where 'pass-
	      word' is the name of the form-field to which /etc/passwd will be
	      the input:

	      curl -F password=@/etc/passwd www.mypasswords.com

	      To  read	the file's content from stdin instead of a file, use -
	      where the file name should've been. This goes for both @	and  <
	      constructs.

	      You  can	also  tell  curl  what	Content-Type  to  use by using
	      'type=', in a manner similar to:

	      curl -F "web=@index.html;type=text/html" url.com

	      or

	      curl -F "name=daniel;type=text/foo" url.com

	      You can also explicitly change the name field of an file	upload
	      part by setting filename=, like this:

	      curl -F "file=@localfile;filename=nameinpost" url.com

	      See further examples and details in the MANUAL.

	      This option can be used multiple times.

       --form-string 
	      (HTTP)  Similar  to  --form except that the value string for the
	      named parameter is used literally. Leading '@' and  '<'  charac-
	      ters, and the ';type=' string in the value have no special mean-
	      ing. Use this in preference to --form if there's any possibility
	      that  the	 string	 value may accidentally trigger the '@' or '<'
	      features of --form.

       -g/--globoff
	      This option switches off the "URL globbing parser". When you set
	      this  option, you can specify URLs that contain the letters {}[]
	      without having them being interpreted by curl itself. Note  that
	      these  letters are not normal legal URL contents but they should
	      be encoded according to the URI standard.

       -G/--get
	      When used,  this	option	will  make  all	 data  specified  with
	      -d/--data	 or  --data-binary  to	be  used in a HTTP GET request
	      instead of the POST request that otherwise would	be  used.  The
	      data will be appended to the URL with a '?' separator.

	      If  used	in  combination with -I, the POST data will instead be
	      appended to the URL with a HEAD request.

	      If this option is used several times, the following  occurrences
	      make  no	difference. This is because undoing a GET doesn't make
	      sense, but you  should  then  instead  enforce  the  alternative
	      method you prefer.

       -h/--help
	      Usage help.

       -H/--header 
(HTTP) Extra header to use when getting a web page. You may specify any number of extra headers. Note that if you should add a custom header that has the same name as one of the internal ones curl would use, your externally set header will be used instead of the internal one. This allows you to make even trick- ier stuff than curl would normally do. You should not replace internally set headers without knowing perfectly well what you're doing. Remove an internal header by giving a replacement without content on the right side of the colon, as in: -H "Host:". curl will make sure that each header you add/replace is sent with the proper end-of-line marker, you should thus not add that as a part of the header content: do not add newlines or carriage returns, they will only mess things up for you. See also the -A/--user-agent and -e/--referer options. This option can be used multiple times to add/replace/remove multiple headers. --hostpubmd5 Pass a string containing 32 hexadecimal digits. The string should be the 128 bit MD5 checksum of the remote host's public key, curl will refuse the connection with the host unless the md5sums match. This option is only for SCP and SFTP transfers. (Added in 7.17.1) --ignore-content-length (HTTP) Ignore the Content-Length header. This is particularly useful for servers running Apache 1.x, which will report incor- rect Content-Length for files larger than 2 gigabytes. -i/--include (HTTP) Include the HTTP-header in the output. The HTTP-header includes things like server-name, date of the document, HTTP- version and more... --interface Perform an operation using a specified interface. You can enter interface name, IP address or host name. An example could look like: curl --interface eth0:1 http://www.netscape.com/ If this option is used several times, the last one will be used. -I/--head (HTTP/FTP/FILE) Fetch the HTTP-header only! HTTP-servers feature the command HEAD which this uses to get nothing but the header of a document. When used on a FTP or FILE file, curl displays the file size and last modification time only. -j/--junk-session-cookies (HTTP) When curl is told to read cookies from a given file, this option will make it discard all "session cookies". This will basically have the same effect as if a new session is started. Typical browsers always discard session cookies when they're closed down. -k/--insecure (SSL) This option explicitly allows curl to perform "insecure" SSL connections and transfers. All SSL connections are attempted to be made secure by using the CA certificate bundle installed by default. This makes all connections considered "insecure" fail unless -k/--insecure is used. See this online resource for further details: http://curl.haxx.se/docs/sslcerts.html --keepalive-time This option sets the time a connection needs to remain idle before sending keepalive probes and the time between individual keepalive probes. It is currently effective on operating systems offering the TCP_KEEPIDLE and TCP_KEEPINTVL socket options (meaning Linux, recent AIX, HP-UX and more). This option has no effect if --no-keepalive is used. (Added in 7.18.0) If this option is used multiple times, the last occurrence sets the amount. --key (SSL/SSH) Private key file name. Allows you to provide your pri- vate key in this separate file. If this option is used several times, the last one will be used. --key-type (SSL) Private key file type. Specify which type your --key pro- vided private key is. DER, PEM, and ENG are supported. If not specified, PEM is assumed. If this option is used several times, the last one will be used. --krb (FTP) Enable Kerberos authentication and use. The level must be entered and should be one of 'clear', 'safe', 'confidential', or 'private'. Should you use a level that is not one of these, 'private' will instead be used. This option requires a library built with kerberos4 or GSSAPI (GSS-Negotiate) support. This is not very common. Use -V/--ver- sion to see if your curl supports it. If this option is used several times, the last one will be used. -K/--config Specify which config file to read curl arguments from. The con- fig file is a text file in which command line arguments can be written which then will be used as if they were written on the actual command line. Options and their parameters must be speci- fied on the same config file line, separated by whitespace, colon, the equals sign or any combination thereof (however, the preferred separator is the equals sign). If the parameter is to contain whitespace, the parameter must be enclosed within quotes. Within double quotes, the following escape sequences are available: \\, \", \t, \n, \r and \v. A backslash preceding any other letter is ignored. If the first column of a config line is a '#' character, the rest of the line will be treated as a com- ment. Only write one option per physical line in the config file. Specify the filename to -K/--config as '-' to make curl read the file from stdin. Note that to be able to specify a URL in the config file, you need to specify it using the --url option, and not by simply writing the URL on its own line. So, it could look similar to this: url = "http://curl.haxx.se/docs/" Long option names can optionally be given in the config file without the initial double dashes. When curl is invoked, it always (unless -q is used) checks for a default config file and uses it if found. The default config file is checked for in the following places in this order: 1) curl tries to find the "home dir": It first checks for the CURL_HOME and then the HOME environment variables. Failing that, it uses getpwuid() on UNIX-like systems (which returns the home dir given the current user in your system). On Windows, it then checks for the APPDATA variable, or as a last resort the '%USER- PROFILE%\Application Data'. 2) On windows, if there is no _curlrc file in the home dir, it checks for one in the same dir the curl executable is placed. On UNIX-like systems, it will simply try to load .curlrc from the determined home dir. # --- Example file --- # this is a comment url = "curl.haxx.se" output = "curlhere.html" user-agent = "superagent/1.0" # and fetch another URL too url = "curl.haxx.se/docs/manpage.html" -O referer = "http://nowhereatall.com/" # --- End of example file --- This option can be used multiple times to load multiple config files. --libcurl Append this option to any ordinary curl command line, and you will get a libcurl-using source code written to the file that does the equivalent of what your command-line operation does! NOTE: this does not properly support -F and the sending of mul- tipart formposts, so in those cases the output program will be missing necessary calls to curl_formadd(3), and possibly more. If this option is used several times, the last given file name will be used. (Added in 7.16.1) --limit-rate Specify the maximum transfer rate you want curl to use. This feature is useful if you have a limited pipe and you'd like your transfer not to use your entire bandwidth. The given speed is measured in bytes/second, unless a suffix is appended. Appending 'k' or 'K' will count the number as kilo- bytes, 'm' or M' makes it megabytes, while 'g' or 'G' makes it gigabytes. Examples: 200K, 3m and 1G. The given rate is the average speed counted during the entire transfer. It means that curl might use higher transfer speeds in short bursts, but over time it uses no more than the given rate. If you also use the -Y/--speed-limit option, that option will take precedence and might cripple the rate-limiting slightly, to help keeping the speed-limit logic working. If this option is used several times, the last one will be used. -l/--list-only (FTP) When listing an FTP directory, this switch forces a name- only view. Especially useful if you want to machine-parse the contents of an FTP directory since the normal directory view doesn't use a standard look or format. This option causes an FTP NLST command to be sent. Some FTP servers list only files in their response to NLST; they do not include subdirectories and symbolic links. --local-port [-num] Set a preferred number or range of local port numbers to use for the connection(s). Note that port numbers by nature are a scarce resource that will be busy at times so setting this range to something too narrow might cause unnecessary connection setup failures. (Added in 7.15.2) -L/--location (HTTP/HTTPS) If the server reports that the requested page has moved to a different location (indicated with a Location: header and a 3XX response code), this option will make curl redo the request on the new place. If used together with -i/--include or -I/--head, headers from all requested pages will be shown. When authentication is used, curl only sends its credentials to the initial host. If a redirect takes curl to a different host, it won't be able to intercept the user+password. See also --loca- tion-trusted on how to change this. You can limit the amount of redirects to follow by using the --max-redirs option. When curl follows a redirect and the request is not a plain GET (for example POST or PUT), it will do the following request with a GET if the HTTP response was 301, 302, or 303. If the response code was any other 3xx code, curl will re-send the following request using the same unmodified method. --location-trusted (HTTP/HTTPS) Like -L/--location, but will allow sending the name + password to all hosts that the site may redirect to. This may or may not introduce a security breach if the site redirects you to a site to which you'll send your authentication info (which is plaintext in the case of HTTP Basic authentication). --max-filesize Specify the maximum size (in bytes) of a file to download. If the file requested is larger than this value, the transfer will not start and curl will return with exit code 63. NOTE: The file size is not always known prior to download, and for such files this option has no effect even if the file trans- fer ends up being larger than this given limit. This concerns both FTP and HTTP transfers. -m/--max-time Maximum time in seconds that you allow the whole operation to take. This is useful for preventing your batch jobs from hang- ing for hours due to slow networks or links going down. See also the --connect-timeout option. If this option is used several times, the last one will be used. -M/--manual Manual. Display the huge help text. -n/--netrc Makes curl scan the .netrc (_netrc on Windows) file in the user's home directory for login name and password. This is typi- cally used for FTP on UNIX. If used with HTTP, curl will enable user authentication. See netrc(4) or ftp(1) for details on the file format. Curl will not complain if that file doesn't have the right permissions (it should not be either world- or group- readable). The environment variable "HOME" is used to find the home directory. A quick and very simple example of how to setup a .netrc to allow curl to FTP to the machine host.domain.com with user name 'myself' and password 'secret' should look similar to: machine host.domain.com login myself password secret --netrc-optional Very similar to --netrc, but this option makes the .netrc usage optional and not mandatory as the --netrc option does. --negotiate (HTTP) Enables GSS-Negotiate authentication. The GSS-Negotiate method was designed by Microsoft and is used in their web appli- cations. It is primarily meant as a support for Kerberos5 authentication but may be also used along with another authenti- cation method. For more information see IETF draft draft-brezak- spnego-http-04.txt. If you want to enable Negotiate for your proxy authentication, then use --proxy-negotiate. This option requires a library built with GSSAPI support. This is not very common. Use -V/--version to see if your version supports GSS-Negotiate. When using this option, you must also provide a fake -u/--user option to activate the authentication code properly. Sending a '-u :' is enough as the user name and password from the -u option aren't actually used. If this option is used several times, the following occurrences make no difference. -N/--no-buffer Disables the buffering of the output stream. In normal work sit- uations, curl will use a standard buffered output stream that will have the effect that it will output the data in chunks, not necessarily exactly when the data arrives. Using this option will disable that buffering. Note that this is the negated option name documented. You can thus use --buffer to enforce the buffering. --no-keepalive Disables the use of keepalive messages on the TCP connection, as by default curl enables them. Note that this is the negated option name documented. You can thus use --keepalive to enforce keepalive. --no-sessionid (SSL) Disable curl's use of SSL session-ID caching. By default all transfers are done using the cache. Note that while nothing should ever get hurt by attempting to reuse SSL session-IDs, there seem to be broken SSL implementations in the wild that may require you to disable this in order for you to succeed. (Added in 7.16.0) Note that this is the negated option name documented. You can thus use --sessionid to enforce session-ID caching. --noproxy Comma-separated list of hosts which do not use a proxy, if one is specified. The only wildcard is a single * character, which matches all hosts, and effectively disables the proxy. Each name in this list is matched as either a domain which contains the hostname, or the hostname itself. For example, local.com would match local.com, local.com:80, and www.local.com, but not www.notlocal.com. (Added in 7.19.4). --ntlm (HTTP) Enables NTLM authentication. The NTLM authentication method was designed by Microsoft and is used by IIS web servers. It is a proprietary protocol, reverse-engineered by clever peo- ple and implemented in curl based on their efforts. This kind of behavior should not be endorsed, you should encourage everyone who uses NTLM to switch to a public and documented authentica- tion method instead, such as Digest. If you want to enable NTLM for your proxy authentication, then use --proxy-ntlm. This option requires a library built with SSL support. Use -V/--version to see if your curl supports NTLM. If this option is used several times, the following occurrences make no difference. -o/--output Write output to instead of stdout. If you are using {} or [] to fetch multiple documents, you can use '#' followed by a number in the specifier. That variable will be replaced with the current string for the URL being fetched. Like in: curl http://{one,two}.site.com -o "file_#1.txt" or use several variables like: curl http://{site,host}.host[1-5].com -o "#1_#2" You may use this option as many times as the number of URLs you have. See also the --create-dirs option to create the local directo- ries dynamically. Specifying the output as '-' (a single dash) will force the output to be done to stdout. -O/--remote-name Write output to a local file named like the remote file we get. (Only the file part of the remote file is used, the path is cut off.) The remote file name to use for saving is extracted from the given URL, nothing else. You may use this option as many times as the number of URLs you have. --remote-name-all This option changes the default action for all given URLs to be dealt with as if -O/--remote-name were used for each one. So if you want to disable that for a specific URL after --remote-name- all has been used, you must use "-o -" or --no-remote-name. (Added in 7.19.0) --pass (SSL/SSH) Passphrase for the private key If this option is used several times, the last one will be used. --post301 Tells curl to respect RFC 2616/10.3.2 and not convert POST requests into GET requests when following a 301 redirection. The non-RFC behaviour is ubiquitous in web browsers, so curl does the conversion by default to maintain consistency. However, a server may require a POST to remain a POST after such a redirec- tion. This option is meaningful only when using -L/--location (Added in 7.17.1) --post302 Tells curl to respect RFC 2616/10.3.2 and not convert POST requests into GET requests when following a 302 redirection. The non-RFC behaviour is ubiquitous in web browsers, so curl does the conversion by default to maintain consistency. However, a server may require a POST to remain a POST after such a redirec- tion. This option is meaningful only when using -L/--location (Added in 7.19.1) --proxy-anyauth Tells curl to pick a suitable authentication method when commu- nicating with the given proxy. This might cause an extra request/response round-trip. (Added in 7.13.2) --proxy-basic Tells curl to use HTTP Basic authentication when communicating with the given proxy. Use --basic for enabling HTTP Basic with a remote host. Basic is the default authentication method curl uses with proxies. --proxy-digest Tells curl to use HTTP Digest authentication when communicating with the given proxy. Use --digest for enabling HTTP Digest with a remote host. --proxy-negotiate Tells curl to use HTTP Negotiate authentication when communicat- ing with the given proxy. Use --negotiate for enabling HTTP Negotiate with a remote host. (Added in 7.17.1) --proxy-ntlm Tells curl to use HTTP NTLM authentication when communicating with the given proxy. Use --ntlm for enabling NTLM with a remote host. --proxy1.0 Use the specified HTTP 1.0 proxy. If the port number is not specified, it is assumed at port 1080. The only difference between this and the HTTP proxy option (-x/--proxy), is that attempts to use CONNECT through the proxy will specify an HTTP 1.0 protocol instead of the default HTTP 1.1. -p/--proxytunnel When an HTTP proxy is used (-x/--proxy), this option will cause non-HTTP protocols to attempt to tunnel through the proxy instead of merely using it to do HTTP-like operations. The tun- nel approach is made with the HTTP proxy CONNECT request and requires that the proxy allows direct connect to the remote port number curl wants to tunnel through to. --pubkey (SSH) Public key file name. Allows you to provide your public key in this separate file. If this option is used several times, the last one will be used. -P/--ftp-port
(FTP) Reverses the default initiator/listener roles when con- necting with FTP. This switch makes curl use active mode. In practice, curl then tells the server to connect back to the client's specified address and port, while passive mode asks the server to setup an IP address and port for it to connect to.
should be one of: interface i.e "eth0" to specify which interface's IP address you want to use (Unix only) IP address i.e "192.168.10.1" to specify the exact IP address host name i.e "my.host.domain" to specify the machine - make curl pick the same IP address that is already used for the control connection If this option is used several times, the last one will be used. Dis- able the use of PORT with --ftp-pasv. Disable the attempt to use the EPRT command instead of PORT by using --disable-eprt. EPRT is really PORT++. Starting in 7.19.5, you can append ":[start]-[end]" to the right of the address, to tell curl what TCP port range to use. That means you spec- ify a port range, from a lower to a higher number. A single number works as well, but do note that it increases the risk of failure since the port may not be available. -q If used as the first parameter on the command line, the curlrc config file will not be read and used. See the -K/--config for details on the default config file search path. -Q/--quote (FTP/SFTP) Send an arbitrary command to the remote FTP or SFTP server. Quote commands are sent BEFORE the transfer takes place (just after the initial PWD command in an FTP transfer, to be exact). To make commands take place after a successful transfer, prefix them with a dash '-'. To make commands be sent after libcurl has changed the working directory, just before the transfer command(s), prefix the command with a '+' (this is only supported for FTP). You may specify any number of commands. If the server returns failure for one of the commands, the entire operation will be aborted. You must send syntactically correct FTP commands as RFC959 defines to FTP servers, or one of the commands listed below to SFTP servers. This option can be used multiple times. SFTP is a binary protocol. Unlike for FTP, libcurl interprets SFTP quote commands before sending them to the server. Follow- ing is the list of all supported SFTP quote commands: chgrp group file The chgrp command sets the group ID of the file named by the file operand to the group ID specified by the group operand. The group operand is a decimal integer group ID. chmod mode file The chmod command modifies the file mode bits of the specified file. The mode operand is an octal integer mode number. chown user file The chown command sets the owner of the file named by the file operand to the user ID specified by the user operand. The user operand is a decimal integer user ID. ln source_file target_file The ln and symlink commands create a symbolic link at the target_file location pointing to the source_file loca- tion. mkdir directory_name The mkdir command creates the directory named by the directory_name operand. pwd The pwd command returns the absolute pathname of the cur- rent working directory. rename source target The rename command renames the file or directory named by the source operand to the destination path named by the target operand. rm file The rm command removes the file specified by the file operand. rmdir directory The rmdir command removes the directory entry specified by the directory operand, provided it is empty. symlink source_file target_file See ln. --random-file (SSL) Specify the path name to file containing what will be con- sidered as random data. The data is used to seed the random engine for SSL connections. See also the --egd-file option. -r/--range (HTTP/FTP/SFTP/FILE) Retrieve a byte range (i.e a partial docu- ment) from a HTTP/1.1, FTP or SFTP server or a local FILE. Ranges can be specified in a number of ways. 0-499 specifies the first 500 bytes 500-999 specifies the second 500 bytes -500 specifies the last 500 bytes 9500- specifies the bytes from offset 9500 and forward 0-0,-1 specifies the first and last byte only(*)(H) 500-700,600-799 specifies 300 bytes from offset 500(H) 100-199,500-599 specifies two separate 100-byte ranges(*)(H) (*) = NOTE that this will cause the server to reply with a multipart response! Only digit characters (0-9) are valid in the 'start' and 'stop' fields of the 'start-stop' range syntax. If a non-digit character is given in the range, the server's response will be unspecified, depending on the server's configuration. You should also be aware that many HTTP/1.1 servers do not have this feature enabled, so that when you attempt to get a range, you'll instead get the whole document. FTP and SFTP range downloads only support the simple 'start-stop' syn- tax (optionally with one of the numbers omitted). FTP use depends on the extended FTP command SIZE. If this option is used several times, the last one will be used. --raw When used, it disables all internal HTTP decoding of content or transfer encodings and instead makes them passed on unaltered, raw. (Added in 7.16.2) -R/--remote-time When used, this will make libcurl attempt to figure out the timestamp of the remote file, and if that is available make the local file get that same timestamp. --retry If a transient error is returned when curl tries to perform a transfer, it will retry this number of times before giving up. Setting the number to 0 makes curl do no retries (which is the default). Transient error means either: a timeout, an FTP 5xx response code or an HTTP 5xx response code. When curl is about to retry a transfer, it will first wait one second and then for all forthcoming retries it will double the waiting time until it reaches 10 minutes which then will be the delay between the rest of the retries. By using --retry-delay you disable this exponential backoff algorithm. See also --retry-max-time to limit the total time allowed for retries. (Added in 7.12.3) If this option is used multiple times, the last occurrence decide the amount. --retry-delay Make curl sleep this amount of time before each retry when a transfer has failed with a transient error (it changes the default backoff time algorithm between retries). This option is only interesting if --retry is also used. Setting this delay to zero will make curl use the default backoff time. (Added in 7.12.3) If this option is used multiple times, the last occurrence determines the amount. --retry-max-time The retry timer is reset before the first transfer attempt. Retries will be done as usual (see --retry) as long as the timer hasn't reached this given limit. Notice that if the timer hasn't reached the limit, the request will be made and while perform- ing, it may take longer than this given time period. To limit a single request?s maximum time, use -m/--max-time. Set this option to zero to not timeout retries. (Added in 7.12.3) If this option is used multiple times, the last occurrence determines the amount. -s/--silent Silent or quiet mode. Don't show progress meter or error mes- sages. Makes Curl mute. -S/--show-error When used with -s it makes curl show an error message if it fails. --socks4 Use the specified SOCKS4 proxy. If the port number is not speci- fied, it is assumed at port 1080. (Added in 7.15.2) This option overrides any previous use of -x/--proxy, as they are mutually exclusive. If this option is used several times, the last one will be used. --socks4a Use the specified SOCKS4a proxy. If the port number is not spec- ified, it is assumed at port 1080. (Added in 7.18.0) This option overrides any previous use of -x/--proxy, as they are mutually exclusive. If this option is used several times, the last one will be used. --socks5-hostname Use the specified SOCKS5 proxy (and let the proxy resolve the host name). If the port number is not specified, it is assumed at port 1080. (Added in 7.18.0) This option overrides any previous use of -x/--proxy, as they are mutually exclusive. If this option is used several times, the last one will be used. (This option was previously wrongly documented and used as --socks without the number appended.) --socks5 Use the specified SOCKS5 proxy - but resolve the host name locally. If the port number is not specified, it is assumed at port 1080. This option overrides any previous use of -x/--proxy, as they are mutually exclusive. If this option is used several times, the last one will be used. (This option was previously wrongly documented and used as --socks without the number appended.) This option (as well as --socks4) does not work with IPV6, FTPS or LDAP. --socks5-gssapi-service The default service name for a socks server is rcmd/server-fqdn. This option allows you to change it. Examples: --socks5 proxy-name --socks5-gssapi-service sockd would use sockd/proxy-name --socks5 proxy-name --socks5-gssapi-service sockd/real-name would use sockd/real-name for cases where the proxy-name does not match the princpal name. (Added in 7.19.4). --socks5-gssapi-nec As part of the gssapi negotiation a protection mode is negoti- ated. The rfc1961 says in section 4.3/4.4 it should be pro- tected, but the NEC reference implementation does not. The option --socks5-gssapi-nec allows the unprotected exchange of the protection mode negotiation. (Added in 7.19.4). --stderr Redirect all writes to stderr to the specified file instead. If the file name is a plain '-', it is instead written to stdout. This option has no point when you're using a shell with decent redirecting capabilities. If this option is used several times, the last one will be used. --tcp-nodelay Turn on the TCP_NODELAY option. See the curl_easy_setopt(3) man page for details about this option. (Added in 7.11.2) -t/--telnet-option Pass options to the telnet protocol. Supported options are: TTYPE= Sets the terminal type. XDISPLOC= Sets the X display location. NEW_ENV= Sets an environment variable. -T/--upload-file This transfers the specified local file to the remote URL. If there is no file part in the specified URL, Curl will append the local file name. NOTE that you must use a trailing / on the last directory to really prove to Curl that there is no file name or curl will think that your last directory name is the remote file name to use. That will most likely cause the upload operation to fail. If this is used on a HTTP(S) server, the PUT command will be used. Use the file name "-" (a single dash) to use stdin instead of a given file. Alternately, the file name "." (a single period) may be specified instead of "-" to use stdin in non-blocking mode to allow reading server output while stdin is being uploaded. You can specify one -T for each URL on the command line. Each -T + URL pair specifies what to upload and to where. curl also sup- ports "globbing" of the -T argument, meaning that you can upload multiple files to a single URL by using the same URL globbing style supported in the URL, like this: curl -T "{file1,file2}" http://www.uploadtothissite.com or even curl -T "img[1-1000].png" ftp://ftp.picturemania.com/upload/ --trace Enables a full trace dump of all incoming and outgoing data, including descriptive information, to the given output file. Use "-" as filename to have the output sent to stdout. This option overrides previous uses of -v/--verbose or --trace- ascii. If this option is used several times, the last one will be used. --trace-ascii Enables a full trace dump of all incoming and outgoing data, including descriptive information, to the given output file. Use "-" as filename to have the output sent to stdout. This is very similar to --trace, but leaves out the hex part and only shows the ASCII part of the dump. It makes smaller output that might be easier to read for untrained humans. This option overrides previous uses of -v/--verbose or --trace. If this option is used several times, the last one will be used. --trace-time Prepends a time stamp to each trace or verbose line that curl displays. (Added in 7.14.0) -u/--user Specify the user name and password to use for server authentica- tion. Overrides -n/--netrc and --netrc-optional. If you just give the user name (without entering a colon) curl will prompt for a password. If you use an SSPI-enabled curl binary and do NTLM authentica- tion, you can force curl to pick up the user name and password from your environment by simply specifying a single colon with this option: "-u :". If this option is used several times, the last one will be used. -U/--proxy-user Specify the user name and password to use for proxy authentica- tion. If you use an SSPI-enabled curl binary and do NTLM authentica- tion, you can force curl to pick up the user name and password from your environment by simply specifying a single colon with this option: "-U :". If this option is used several times, the last one will be used. --url Specify a URL to fetch. This option is mostly handy when you want to specify URL(s) in a config file. This option may be used any number of times. To control where this URL is written, use the -o/--output or the -O/--remote-name options. -v/--verbose Makes the fetching more verbose/talkative. Mostly useful for debugging. A line starting with '>' means "header data" sent by curl, '<' means "header data" received by curl that is hidden in normal cases, and a line starting with '*' means additional info provided by curl. Note that if you only want HTTP headers in the output, -i/--include might be the option you're looking for. If you think this option still doesn't give you enough details, consider using --trace or --trace-ascii instead. This option overrides previous uses of --trace-ascii or --trace. Use -s/--silent to make curl quiet. -V/--version Displays information about curl and the libcurl version it uses. The first line includes the full version of curl, libcurl and other 3rd party libraries linked with the executable. The second line (starts with "Protocols:") shows all protocols that libcurl reports to support. The third line (starts with "Features:") shows specific features libcurl reports to offer. Available features include: IPv6 You can use IPv6 with this. krb4 Krb4 for FTP is supported. SSL HTTPS and FTPS are supported. libz Automatic decompression of compressed files over HTTP is supported. NTLM NTLM authentication is supported. GSS-Negotiate Negotiate authentication and krb5 for FTP is supported. Debug This curl uses a libcurl built with Debug. This enables more error-tracking and memory debugging etc. For curl- developers only! AsynchDNS This curl uses asynchronous name resolves. SPNEGO SPNEGO Negotiate authentication is supported. Largefile This curl supports transfers of large files, files larger than 2GB. IDN This curl supports IDN - international domain names. SSPI SSPI is supported. If you use NTLM and set a blank user name, curl will authenticate with your current user and password. -w/--write-out Defines what to display on stdout after a completed and success- ful operation. The format is a string that may contain plain text mixed with any number of variables. The string can be spec- ified as "string", to get read from a particular file you spec- ify it "@filename" and to tell curl to read the format from stdin you write "@-". The variables present in the output format will be substituted by the value or text that curl thinks fit, as described below. All variables are specified as %{variable_name} and to output a normal % you just write them as %%. You can output a newline by using \n, a carriage return with \r and a tab space with \t. NOTE: The %-symbol is a special symbol in the win32-environment, where all occurrences of % must be doubled when using this option. The variables available at this point are: url_effective The URL that was fetched last. This is most mean- ingful if you've told curl to follow location: headers. http_code The numerical response code that was found in the last retrieved HTTP(S) or FTP(s) transfer. In 7.18.2 the alias response_code was added to show the same info. http_connect The numerical code that was found in the last response (from a proxy) to a curl CONNECT request. (Added in 7.12.4) time_total The total time, in seconds, that the full opera- tion lasted. The time will be displayed with mil- lisecond resolution. time_namelookup The time, in seconds, it took from the start until the name resolving was completed. time_connect The time, in seconds, it took from the start until the TCP connect to the remote host (or proxy) was completed. time_appconnect The time, in seconds, it took from the start until the SSL/SSH/etc connect/handshake to the remote host was completed. (Added in 7.19.0) time_pretransfer The time, in seconds, it took from the start until the file transfer was just about to begin. This includes all pre-transfer commands and nego- tiations that are specific to the particular pro- tocol(s) involved. time_redirect The time, in seconds, it took for all redirection steps include name lookup, connect, pretransfer and transfer before the final transaction was started. time_redirect shows the complete execu- tion time for multiple redirections. (Added in 7.12.3) time_starttransfer The time, in seconds, it took from the start until the first byte was just about to be trans- ferred. This includes time_pretransfer and also the time the server needed to calculate the result. size_download The total amount of bytes that were downloaded. size_upload The total amount of bytes that were uploaded. size_header The total amount of bytes of the downloaded head- ers. size_request The total amount of bytes that were sent in the HTTP request. speed_download The average download speed that curl measured for the complete download. speed_upload The average upload speed that curl measured for the complete upload. content_type The Content-Type of the requested document, if there was any. num_connects Number of new connects made in the recent trans- fer. (Added in 7.12.3) num_redirects Number of redirects that were followed in the request. (Added in 7.12.3) redirect_url When a HTTP request was made without -L to follow redirects, this variable will show the actual URL a redirect would take you to. (Added in 7.18.2) ftp_entry_path The initial path libcurl ended up in when logging on to the remote FTP server. (Added in 7.15.4) ssl_verify_result The result of the SSL peer certificate verifica- tion that was requested. 0 means the verification was successful. (Added in 7.19.0) If this option is used several times, the last one will be used. -x/--proxy Use the specified HTTP proxy. If the port number is not speci- fied, it is assumed at port 1080. This option overrides existing environment variables that set the proxy to use. If there's an environment variable setting a proxy, you can set proxy to "" to override it. Note that all operations that are performed over a HTTP proxy will transparently be converted to HTTP. It means that certain protocol specific operations might not be available. This is not the case if you can tunnel through the proxy, as done with the -p/--proxytunnel option. Starting with 7.14.1, the proxy host can be specified the exact same way as the proxy environment variables, including the pro- tocol prefix (http://) and the embedded user + password. If this option is used several times, the last one will be used. -X/--request (HTTP) Specifies a custom request method to use when communicat- ing with the HTTP server. The specified request will be used instead of the method otherwise used (which defaults to GET). Read the HTTP 1.1 specification for details and explanations. Common additional HTTP requests include PUT and DELETE, but related technologies like WebDAV offers PROPFIND, COPY, MOVE and more. (FTP) Specifies a custom FTP command to use instead of LIST when doing file lists with FTP. If this option is used several times, the last one will be used. -y/--speed-time