pzip ( 1 ) USER COMMANDSpzip ( 1 )

NAME

pzip - fixed record partition compress/decompress

SYNOPSIS

pzip [ options ] file

DESCRIPTION

pzip compresses and decompresses data files of fixed length rows (records) and columns (fields). It performs better than gzip(1) in space/time on data that has many (typically > 50%) columns that change at a low rate (columns with a low rate of change are low frequency; columns with a high rate of change are high frequency).

The pzip compress format is itself gzipped; decompressed data is reorganized according to the user-specified partition file (see the --partition option below) before being passed to gzip. Low frequency columns are difference encoded and high frequency column groups are transposed to column-major order. The gzip tables are flushed between each column partition group. This has a positive space/time effect on the gzip string match and huffman tables.

If a partition file is specified then pzip compresses the input file to the standard output, otherwise pzip decompresses the input file to the standard ouput. If file is omitted then the standard input is used. If the standard input is a tty then /dev/null is silently used.

file may be pzip compressed, gzip compressed, or raw. pzip files self-identify; the row size and partition can be determined from the pzip header. For gzip and raw data, the following are done to determine the row size:
(1)
The row size is taken from the --row option if specified.
(2)
If the --partition option is specified then the row size is taken from the partition file.
(3)
If the data is newline-terminated and if it contains at least two lines and if the first two data lines have the same length then that length is taken to be the row size.
(4)
Otherwise the row size cannot be determined and pzip exits with a diagnostic.

OPTIONS

-a, --append
Sets the PZ_APPEND flag that may be used by some disciplines.
-b, --bzip
Use bzip(1) compression instead of the default gzip(1). bzip is not fully supported, pending further investigation.
-c, --comment=comment
Place comment in the output pzip file header when compressing. The comment is listed by the --header option.
-x, --crc
Enable gzip crc32 cyclic redundancy checking for decompress. On some systems this can double the execution wall time. Most data corruption errors are still caught even with nocrc.
-d, --dump
Enable detailed tracing.
-B, --bufsize=size
Set the output buffer size to size -- for debugging.
-D, --debug=level
Set the debug trace level to level. Higher levels produce more output.
-O, --dio
Push the sfdcdio(3) direct io discipline on the input streams. Silently ignored on systems that do not support direct io.
-G, --gzip
--nogzip disables gzip compression. Most often used for conversion or debugging. On by default; -G means --nogzip.
-h, --header
List header information on the input pzip file and exit. This output is compatible with the --partition file format.
-l, --library=library
Loads the dll library via the pzlib() call. library must contain the function int pz_init(Pz_t* pz, Pzdisc_t* disc) which is called during pzip stream initialization. pz_init allows run time modification to disc: most often it supplies alternate discipline functions. Runtime libraries may interpret options specific to the library; library usage and description will be appended to online help output if the help options appear after the --library option. Runtime libraries may provide additional diagnostics and tracing when --summary, --verbose or --dump are specified. In general, runtime libraries are not needed for decompression. The --header option lists the runtime libraries used to compress the input file.
-z, --lzw
Use compress(1) lzw compression instead of the default gzip(1). lzw is not fully supported, pending further investigation.
-o, --override=begin[-end]=value
Override the column partition. Currently only fixed value columns may be specified. The syntax is begin[-end]='value' where begin is the beginning column offset (starting at 0), end is the ending column offset for an inclusive range, and value is the fixed column value. Uncompress time is improved when high frequency columns are given fixed values (see the --partition option).
-p, --partition=file
file specifies the data row size and the high frequency column partition groups and permutation. file may contain URL-like components: path?name=part or path#part reads the partition file path and uses the partition named part. Other options may be set by separating each with , or space. The partition file is a sequence of lines. Comments start with # and continue to the end of the line. The first non-comment line specifies the optional name string in "...". The next non-comment line specifies the row size. The remaining lines operate on column offset ranges of the form: begin[- end] where begin is the beginning column offset (starting at 0), and end is the ending column offset for an inclusive range. The file name // or /gzip/ disables pzip partitioning and applies only gzip compression. The operators are:
range [...]
places all columns in the specified range list in the same high frequency partition group. Each high frequency partition group is processed as a separate block by the underlying compressor (gzip(1) by default).
range='value'
specifies that each column in range has the fixed character value value. C-style character escapes are valid for value.
-Z, --push
Push the sfdcpzip(3) io discipline rather than direct library calls. Used for debugging and performance testing.
-P, --pzip
--nopzip disables pzip compression. Most often used for conversion or debugging. On by default; -P means --nopzip.
-Q, --regress
Generate output for regression testing, such that identical invocations with identical input files will generate the same output.
-r, --row=row-size
Specifies the input row size (number of byte columns) for data that does not self-identify.
-S, --split[=pattern]
Instead of compressing, the input split discipline, which must be specified by a subsequent --library option, splits the input data into files named id. id is determined by the split discipline namef function. The optional pattern is a ksh(1) file match pattern that limits the split to id's matching pattern (e.g., --split='1234|98765'.) If --append is also specified then the data is appened to any pre-existing id files; otherwise each file is truncated when the first record containing id data is read. If there are no records with id data then the id file is not modified. --split should be used in a separate directory, and the directory should be cleared when --append is not specified to avoid mixing inconsistent data. No records will be written to a split file with size >= --window bytes. The option value may be omitted.
-s, --summary
Enable summary tracing to the standard error. Runtime libraries may add addtional information to the default pzip(3) library summary output. Compression summary includes the compression rate, bytes per record, and compression wall time. This option also enables split discipline warnings about id partitions that should be generated by pin(1) and added to the partition file to improve compression. The pin(1) output, with an additional "id" line manually prepended, can then be appended to an existing partition file.
-T, --test=mask
Enable pzip(3) implementation-specific tests and tracing.
-v, --verbose
Enable intermediate tracing.
-w, --window=window-size
Each chunk of window bytes is compressed separately. The window size may be silently decreased to accomodate an integral number of complete rows. The default value is 4M.
-W, --write-test=group
Loop on sfread()/pzwrite(3) in chunks of group records rather than a single pzdeflate() call for compression. Used for debugging and performance testing.
-X, --prefix=count[*terminator]
Uncompressed data contains a prefix that is defined by count and an optional terminator. This data is preserved but is not pzip compressed. If count is 0 on uncompress then the header is not copied to the output. terminator may be one of:
omitted
count bytes.
L
count newline terminated records.
'char'
count char terminated records.

SEE ALSO

bzip(1), gzip(1), pin(1), pop(1), pzip(3)

BUGS

pzip decompress currently fails if the standard input is a pipe. This will be addressed in a future release.

IMPLEMENTATION

version
pzip (AT&T Research) 2003-07-17
author
Glenn Fowler <gsf@research.att.com >
copyright
Copyright © 1998-2009 AT&T Intellectual Property
license
http://www.opensource.org/licenses/cpl1.0.txt